
Jensen Vintage Ceramic C12K2 Compact Cabs - Supercab IR Library
The official Jensen IR library based on the C12K2, Ceramic speaker from the Vintage series

Jensen Vintage Ceramic C12K2 Compact Cabs - Supercab IR Library (912 IRs)
This is a systematic capture of a Jensen Vintage Ceramic C12K2 Compact Cabs speaker, from the Vintage Series, installed in three different enclosures:
- a 1x12" Open Back cabinet
- a 1x12" Closed Back cabinet
- a 1x12" Bass Reflex cabinet
for a total of 912 IRs, developed in conjunction with a Jensen Speakers product specialist, in order to recreate the most authentic playing experience, as if you were playing an original speaker.
Discover the Jensen Vintage Ceramic C12K2 Compact Cabs
The C12K2 is a step forward from the C12K. It has a different cone membrane which grants a more extended treble response to increase the detail and the shimmer of the tone, yet retains a well contoured smoothness. Equally at home with clean and mid-gain crunch tones, the C12K2 offers an outstanding response to the player’s touch. When used with higher gain tones, it offers a powerful, rounded, organic tone that delivers a full-bodied thickness to single note lead runs. Overloud captured the C12K2 in a fine-tuned selection of compact and large cabinets, with their trademark 19 microphones / 16 position process.
DISCOVER THE ENTIRE COLLECTION
The series of the official Jensen® IR Libraries is growing every day!
Any single library in the collection is created after an extensive sampling and editing work in conjunction with Jensen Speakers product specialists, seeking for perfection in every capturing step.
GET MORE, SAVE MORE
Bundles of 3 and 10 libraries with increasing discounts are available

Made for the supercabinet
The library is created for the TH-U Supercabinet, which allows to:
- graphically browse the IRs in the library
- blend them together
- craft new cabinet tones with the unique Multiband mode
- use the IR in the software
- export the IRs in .wav, compatible with the software IR loaders and all the major hardware modelers
Specifications
The microphones used during the capturing session are:
- AKG C12
- AKG C414
- AKG C414 XLS
- Audio Technica AT4033
- Beyerdynamic M160
- Coles 4038
- Electro Voice RE16
- Groove Tubes MD1
- Neumann KM84
- Neumann U47
- Neumann U87
- RODE NT1
- Royer R121
- Sennheiser E609
- Sennheiser MD421
- Shure B52
- Shure SM57
- Shure SM58
- Shure SM81
Every microphone has been moved to 4 different horizontal position (Cap, Cap Edge, Cone and Cone Edge), two distances and two angles, for a total of 16 IRs each.
All the measurement set has been repeated for each one of the cabinet in the library.
All IRs have been phase aligned and they can be blended without phase cancellations.